- Home
- About
- Products
- SBS Pre Applied Membrane
- Cementitious waterproofing
- Mineral wool
- APP Bituminous Membrane
- SBS Bituminous Membrane
- XPS Foam
- HVAC Accessories
- Anchor Pins
- Bands & Clamps
- Calcium Silicate Pipe Support
- Rockal Duct Sealant 32-17
- Flexible Duct Uninsulated
- Flexible Duct Connector
- Pir Polyisocyanurate
- Stick Up Pin
- Aluminum Foil Tape
- Aluminum Jacketing (Cladding)
- Wooden Pipe Support
- Flexible duct insulated
- Polyurethane (PUR)
- Reinforced Aluminum Tape (FSK)
- High Temperature Silicon
- Adhesive (85-20)
- AFG Tape
- Supreme Fiber
- Cold Bitumen Emulsion
- Hydroponic
- Other Products
- Categories
- Applications
- Projects
- Sustainability
- R & D
- Press Center
- Contact Us
Flexible Duct Uninsulated
ROCKAL Standard are fully flexible, light weight, uninsulated, laminated ducts suitable for low- and high-pressure systems. The ducts consist of several layers of aluminum and polyester laminates encapsulating a high tensile steel wire helix.
Description:
ROCKAL Standard are fully flexible, light weight, uninsulated, laminated ducts suitable for low- and high-pressure systems. The ducts consist of several layers of aluminum and polyester laminates encapsulating a high tensile steel wire helix. Rockal flexible ducts are easily installed over either round or oval connections. At high temperature, or in case of fire, no toxic or gas emission.
The ducts are manufactured according to the international standard EN 13180.
Applications:
Rockal Flexible ducts are used in heating, ventilation and air conditioning (HVAC) to deliver and remove air.
- Air conditioning
- Factory equipment
- Vehicle construction
- Bathroom
- Confined space
- Tumbler dryer
- Range hood
- Water heater
- Fanner
Construction and Dimensions:
Construction: ROCKAL flexible ducts constructed out of a “sandwich construction” laminates. This means the different layers of aluminum and polyester are overlapping each other completely and encapsulates a high tensile steel wire. The multiple laminates are adhered with fire retardant thermosetting adhesive.
Temperature Range: -30 °C to + 140 °C.
Air Velocity: Max. 30 m/s (5900 ft/min).
Standard Color: Aluminum
Types:
⦁ Single layer
⦁ Double layer
⦁ Multi layer
⦁ Metalized
Thickness:
Total thickness of layers in rendezvous area (without wire) is about 70 μm
Internal Diameter: All standard diameters ranging from 102mm to 508mm (4 – 20 inch).
Fire Class: Please see schedule on page 274.
Wire Spacing:
- 4 - 6" : 3.0 cm.
- 8 - 10" : 3.5 cm.
- 12 - 20" : 4.5 cm.
Wire
Diameter of wire are used:
- 1mm, from dia. 102mm - 178mm
- 1.2mm, from dia. 203mm - 315mm
- 1.2mm, from dia. 356mm - 508mm.
Chemical Resistance:
⦁ Good resistance to many solvents
⦁ Moderate resistance to acid & base
Mechanical and Technical Data:
Minimum Bending Radius: 0.58 x Ø
Working Pressure: Max. 300mm WG (3000 Pa. or 10-inch WG)
Packing
|
Dia. Range |
Std. Length (meters) |
Carton Size (mm) |
|
| (mm) | (inches) | 10 meters | 350*350*600 |
| 102-305 | (4”-12”) | 10 meters | 350*350*750 |
| 355 | (14”) | 10 meters | 500*500*750 |
| 405 | (16”) | 10 meters | 500*500*750 |
| 457 | (18”) | 10 meters | 500*500*750 |
| 508 | (20”) | 10 meters | 500*500*750 |
Related Products
Mineral wool Blankets (Rolls)
Mineral wool blanket insulation is a type of flexible insulation made from spun mineral wool, which is derived from a mixture of volcanic rock and slag. Mineral wool Rolls are high performance solution for thermal & acoustic insulation for a range of commercial and industrial Buildings.
Mineral wool Pipe Sections
Mineral wool pipe section is a type of insulation material made from mineral minerals (such as basalt and slag) that have been melted at high temperatures and then spun into fibers. Mineral wool pipe section is commonly used to insulate pipes and ductwork in building and HVAC systems.
