ROCK FLEX is an Elastomeric high performance, prefabricated, modified bitumen mem- brane consisting of proprietary waterproofing bitumen compound, reinforced with non-woven polyester Carrier.
ROCK FLEX is an Elastomeric high performance, prefabricated, modified bitumen membrane consisting of proprietary waterproofing bitumen compound, reinforced with non-woven polyester Carrier.
ROCK FLEX proprietary waterproofing com- pound is formulated with high grade bitumen modified with Styrene Butadiene Styrene (SBS) polymer which provides additional elasticity flexibility and dynamic resistance. The membrane withstands temperature fluctuations and high mechanical loads providing a long-term, reliable and effective waterproofing.
To improve the UV resistance and durability for The Product, the membrane is coated with Mineral Stabilizers.
ROCK PROOF waterproofing membrane are used for a wide variety of application:
The Product could be applied for waterproofing of foundations and engineering structures by torching hot air generator or by using special adhesives in both cold and hot applications
Chemical resistance to wide range of light acidic, alkaline solutions and bacteria.
There are several types of reinforcement materials used in bituminous membranes, including:
Non- woven Glass fiber Reinforcement: provides tensile strength and dimensional stability
Non-woven polyester fabric: provides tensile strength and stability
The choice of reinforcement material depends on the specific requirements of the roofing system and the desired properties such as reflectivity, dimensional stability, and resistance to environmental factors.
The surface finish of a bituminous membrane refers to the final appearance of the membrane once it has been installed on the roof. The surface finish can have an impact on the overall aesthetic of the roof, as well as its performance. Some common types of surface finishes for bituminous membranes include:
Sand finish: a rough, textured surface that helps to increase the coefficient of friction and improve slip resistance, Specially (White/Yellow)
Granulated finish: a surface that is covered with small, granulated particles, typically made of a durable material such as aluminum oxide. This finish provides a high level of slip resistance and UV stability. Available in colors (Red, Grey, Green)
Smooth finish: a smooth surface that provides a sleek, modern appearance, but may have lower slip resistance compared to other finishes.
The choice of surface finish depends on the specific requirements of the roofing system, such as the desired level of slip resistance and the type of roof deck.
SBS (Styrene Butadiene Styrene) bituminous membranes are installed using a variety of methods, including:
Heat welded seam method: involves heating the overlapped edges of the membrane with a propane torch to create a seamless, watertight bond between the two pieces of membrane.
Cold adhesive method: involves using a cold-applied adhesive to bond the membrane to the roof deck.
Mechanically fastened method: involves using special mechanical fasteners to attach the membrane to the roof deck.
Ballasted method: involves placing heavy stones or pavers on top of the membrane to keep it in place, without the need for fasteners or adhesives.
The choice of installation method will depend on factors such as the type of roof deck, the local building codes and regulations, and the desired level of seam strength and durability. It is recommended to seek the guidance of a professional roofing contractor for the installation of an SBS bituminous membrane.
|Straightness||EN 1848-1||-||± 6||mm||درجة اإلستقامة|
Softening Point (R&B) Flexibility at low temperature
Flow resistance at elevated temperature
EN 1109 ASTM D-5147 EN 1110 ASTM D-5147
- 7 : - 10
|درجة التطرية المرونة عند درجات الحرارة المنخفضة الثبات عند درجات الحرارة العالية|
|Tensile Strength-Longitudinal||EN 12311-1ASTM D-5147||± 20%||600||N/5cm||مقاومة الشد القصوي-طوليا|
|Tensile Strength-Transverse||EN 12311-1ASTM D-5147||± 20%||350||N/5cm||مقاومة الشد القصوي-عرضيا|
|Elongation @Break -Longitudinal||EN 12311-1ASTM D-5147||± 15||35||%||معدل اإلستطالة - طوليا|
|Elongation @Break -Transverse||EN 12311-1ASTM D-5147||± 15||40||%||معدل اإلستطالة - عرضيا|
|Tearing Strength-Longitudinal||EN 12310-1||≥||200||N||مقاومة التمزق-طوليا|
|Tearing Strength-Transverse||EN 12310-1||≥||180||N||مقاومة التمزق-عرضيا|
|Tensile Tear Resistance-Longitudinal||ASTM D-5147 D-4073||± 20%||400||N||مقاومة التمزق بطريقة الشد-طوليا|
|Tensile Tear Resistance-Transverse||ASTM D-5147 D-4073||± 20%||350||N||مقاومة التمزق بطريقة الشد-عرضيا|
|Resistance to Static Loading||EN 12730||≥||10||Kg||مقاومة اإلختراق اإلستاتيكى|
|Resistance to Impact Loading||EN 12691||≥||800||mm||مقاومة اإلختراق الديناميكى|
|Shear Resistance of joint L/T||EN 12317-1||± 20%||600/350||N/5cm||مقاومة الشد عند منطقة التركيب|
|Dimensional Stability L/T||EN 1107-1||-||1||%||ثبات األبعاد|
|Adhesion to concrete||Pelage UEATC||-||40||N/5cm||قوة اإللتصاق باالسطح الخرسانية|
|Water absorption||ASTM D-5147||≤||0.15||%||
درجة إمتصاص الماء
|Fire Classification - Extremal Fire||EN 13501-5||-||F roof||-||تصنيف الحريق-أداء الحريق|
|Reaction to fire||EN 13501-1||-||F||-||رد الفعل عند التعرض للنار|
|Water Impermeability||EN 1928 method A||-||Pass||10Kpa||عدم نفاذية الماء|
|Thermal Ageing in air||EN 1296||-||Pass||-||اإلهتراء نتيجة التسخين|
|(in oven 4 weeks at 70 ± 2°C)|
|Ageing Due to Atmospheric Agents (U.V. Test weathering)||ASTM G 53 UNI 8202/29||-||Pass||-||
مقاومة التقادم لالشعة
|Average loss of slates||EN 12039||≤||30||%||متوسط الفاقد من الحبيبات|
The manufacturer reserves the right to change the specification of the product or its performance, or the contents of the guide, without any prior notice.
• Note Products could vary in: Thickness - 3:4mm
• ± All Tolerances according to UEAtc Directives
• PES: Non-Woven Polyester Reinforcement Carrier
• This TDS issued 01/2020 Revoke all previous issued
Rockwool blanket insulation is a type of flexible insulation made from spun mineral wool, which is derived from a mixture of volcanic rock and slag. Rockwool Rolls are high performance solution for thermal & acoustic insulation for a range of commercial and industrial Buildings.