- Home
- About
- Products
- Supreme Flex
- SBS Pre Applied Membrane
- Cementitious waterproofing
- Mineral wool
- APP Bituminous Membrane
- SBS Bituminous Membrane
- XPS Foam
- HVAC Accessories
- Anchor Pins
- Bands & Clamps
- Calcium Silicate Pipe Support
- Duct Sealant 32-17
- Flexible Duct Uninsulated
- Flexible Duct Connector
- Pir Polyisocyanurate
- Stick Up Pin
- Aluminum Foil Tape
- Aluminum Jacketing (Cladding)
- Wooden Pipe Support
- Flexible duct insulated
- Polyurethane (PUR)
- Reinforced Aluminum Tape (FSK)
- High Temperature Silicon
- Adhesive (85-20)
- AFG Tape
- Supreme Fiber
- Cold Bitumen Emulsion
- Hydroponic
- Categories
- Applications
- Projects
- Sustainability
- R & D
- Press Center
- Contact Us
Supreme Flex Pipes
ROCKAL Supreme Flex pipes are applied to insulate HVAC piping, including chilled water lines, hot water pipes, and refrigerant lines. Similar to the benefits of insulating ducts, Supreme Flex Pipes Prevent heat loss in hot water pipes and heat gain in chilled water pipes. Additionally, they Reduce ondensation, especially in chilled water systems, ensuring system longevity. Provides protection against freezing in colder environments.
ROCKAL Supreme Flex pipes are applied to insulate HVAC piping, including chilled water lines, hot water pipes, and refrigerant lines. Similar to the benefits of insulating ducts, Supreme Flex Pipes Prevent heat loss in hot water pipes and heat gain in chilled water pipes. Additionally, they Reduce ondensation, especially in chilled water systems, ensuring system longevity. Provides protection against freezing in colder environments.
Product availability
Supreme Flex Pipe: chemically cross-linked, closed cell Insulation in pipe sleeve form.
Can be covered with Aluminum sheet or Polyethylene film. Available with a self adhesive version
Available thicknesses (10,12,20,25,40,50) mm.
Dimensions: Pipe sleeve length is 2000 mm and the internal diameter ranges from 6 mm to 711 mm ( 28”)
Technical Specification
| CHARACTERISTIC | STANDARD | VALUE |
| Density (Kg/m3) | ASTM D 3575 | 28-30 |
| Thermal Conductivity (W/mk) | ASTM D 3575 | 0.032 : 0.039 |
| Operation temperature range (°C) | -80 : 110 | |
| Fire rating | ASTM E 84 | FSI <25, SDI <50 |
| EN 13501 | Euroclass B-s3, d0 | |
| BS 476 Part 6&7 | Class 0 | |
| Compressive strength at 10% compression (KPa) |
ASTM D 3575 | 24 |
| Water absorption after 28 days (%vol) | ASTM D 3575 | 0-2% |
| Water vapor diffusion factor (μ-value) | ASTM E 96/E96M | 65000 |
| Corrosion prevention | EN 13468 | PH Neutral (7) |
| Leachable Ions | ASTM C 871 | Very low |
| Resistance to Fungi | ASTM G21 | Fully resistant |
| Resistance to Bacteria | ISO 22196 | Fully resistant |
Downloads
Related Products
Mineral wool Blankets (Rolls)
Mineral wool blanket insulation is a type of flexible insulation made from spun mineral wool, which is derived from a mixture of volcanic rock and slag. Mineral wool Rolls are high performance solution for thermal & acoustic insulation for a range of commercial and industrial Buildings.
Mineral wool Pipe Sections
Mineral wool pipe section is a type of insulation material made from mineral minerals (such as basalt and slag) that have been melted at high temperatures and then spun into fibers. Mineral wool pipe section is commonly used to insulate pipes and ductwork in building and HVAC systems.
