- Home
- About
- Products
- Supreme Flex
- SBS Pre Applied Membrane
- Cementitious waterproofing
- Mineral wool
- APP Bituminous Membrane
- SBS Bituminous Membrane
- XPS Foam
- HVAC Accessories
- Anchor Pins
- Bands & Clamps
- Calcium Silicate Pipe Support
- Duct Sealant 32-17
- Flexible Duct Uninsulated
- Flexible Duct Connector
- Pir Polyisocyanurate
- Stick Up Pin
- Aluminum Foil Tape
- Aluminum Jacketing (Cladding)
- Wooden Pipe Support
- Flexible duct insulated
- Polyurethane (PUR)
- Reinforced Aluminum Tape (FSK)
- High Temperature Silicon
- Adhesive (85-20)
- AFG Tape
- Supreme Fiber
- Cold Bitumen Emulsion
- Hydroponic
- Categories
- Applications
- Projects
- Sustainability
- R & D
- Press Center
- Contact Us
Supreme Flex Rolls
ROCKAL Supreme Flex Rolls can be used to insulate air ducts to minimize heat loss or gain during air distribution. It maintains consistent air temperatures and increases system efficiency. The sheets also prevent condensation on duct surfaces, avoiding mold and mildew growth
Description:
ROCKAL Supreme Flex Rolls can be used to insulate air ducts to minimize heat loss or gain during air distribution. It maintains consistent air temperatures and increases system efficiency. The sheets also prevent condensation on duct surfaces, avoiding mold and mildew growth.
ROCKAL Supreme Flex sheets are installed inside AHUs and other equipment to reduce noise transmission and vibrations. When installed on outdoor equipment and ducts, they protect against weathering agents and increase the lifespan of equipment along with their insulation qualities.
Product availability:
Supreme Flex roll: chemically cross-linked, closed-cell Insulation in sheet/roll form. Can be covered with an Aluminum sheet or a Polyethylene film. Available with a self-adhesive version.
Available thicknesses (3,5,10,12,15,20,25,30,35,4
0,50) mm.
Dimensions: Roll width is 1000mm or 1500 mm, and Length changes based on thickness for loadability.
Technical Specification
| CHARACTERISTIC | STANDARD | VALUE |
| Density (Kg/m3) | ASTM D 3575 | 28-30 |
| Thermal Conductivity (W/mk) | ASTM D 3575 | 0.032 : 0.039 |
| Operation temperature range (°C) | -80 : 110 | |
| Fire rating | ASTM E 84 | FSI <25, SDI <50 |
| EN 13501 | Euroclass B-s3, d0 | |
| BS 476 Part 6&7 | Class 0 | |
| Compressive strength at 10% compression (KPa) |
ASTM D 3575 | 24 |
| Water absorption after 28 days (%vol) | ASTM D 3575 | 0-2% |
| Water vapor diffusion factor (μ-value) | ASTM E 96/E96M | 65000 |
| Corrosion prevention | EN 13468 | PH Neutral (7) |
| Leachable Ions | ASTM C 871 | Very low |
| Resistance to Fungi | ASTM G21 | Fully resistant |
| Resistance to Bacteria | ISO 22196 | Fully resistant |
Downloads
Related Products
Mineral wool Blankets (Rolls)
Mineral wool blanket insulation is a type of flexible insulation made from spun mineral wool, which is derived from a mixture of volcanic rock and slag. Mineral wool Rolls are high performance solution for thermal & acoustic insulation for a range of commercial and industrial Buildings.
Mineral wool Pipe Sections
Mineral wool pipe section is a type of insulation material made from mineral minerals (such as basalt and slag) that have been melted at high temperatures and then spun into fibers. Mineral wool pipe section is commonly used to insulate pipes and ductwork in building and HVAC systems.
